Stainless steel water tank punch plate is how to make, do you understand?

Stainless steel water tank is a common kind of water treatment equipment, is made of stainless steel plate by stamping mold forming, and then through a series of processes, so stainless steel water tank is also called punching plate water tank.

Today Xiaobian will introduce the production process of stainless steel water tank pressing plate.

1. First determine the design scheme, according to the design scheme to determine the required size of the water tank plate.

2. Calculate the weight of the stainless steel water tank molding plate according to the selected material type and number, and calculate the amount of stainless steel material required per unit weight.

3. Select the size of the plate according to the actual needs. After determining the size of the plate, you can choose the plate processing plant for processing.

4 if the use of stainless steel plate, it needs to be pretreatment. Pretreatment mainly includes surface cleaning and derusting treatment, the specific steps are as follows:

1. Clean the surface, and then use special tools to remove rust on the surface to reach the specified level of rust removal;

2. After surface treatment, put it into the polishing machine for polishing treatment;

3 stainless steel water tank surface polishing, surface roughness will reach below 5um, in order to obtain high gloss;

4. Clean scratches and stains on the surface of the stainless steel tank with clean water or acid solution; Use a soft cloth to wipe the metal parts and edges of the stainless steel tank. Remove any unwanted dirt;

5. Use deionized water or soft cloth to wipe the inner wall of the stainless steel water tank;

6. If using detergent, it is recommended to wipe it until it does not foam.

Place the stainless steel water tank moulded plate into the moulded press and press it with the mould. The thickness of the stainless steel water tank molding plate depends on the mold used, and the thicker the thickness, the larger the size, the higher the price. After stamping through the mold, the tank can be assembled. After assembly, the production cycle of stainless steel water tank will be greatly shortened, but also greatly reduce the cost of human and material resources.

Next is the cutting, usually, stainless steel water tank using CNC laser cutting machine for cutting. After determining the size according to the design scheme, the board needs to be cut into the desired shape. Usually, need to cut into triangular, trapezoidal, diamond shape, and then according to the need to choose the appropriate plate thickness. According to the design scheme and processing size will be cut into the corresponding shape of the plate, can be stamping molding. There will be some defects on the surface of the water tank plate after stamping, such as scratches, burrs, bubbles, etc., so the surface treatment should be carried out before stamping.

Wenzhou Jiansheng Stainless Steel Co., Ltd. is specialized in the production of stainless steel water tank, insulation water tank, fire water tank, combination water tank, water tower cover, assembled press template, stamping plate and other products. For more information about the products, please pay attention to www.wzjsbxg.com